News

Sidebar

RECENT ARTICLES

Basement Egress Windows: IRC R310 Code Requirements and Aluminum Frame Solutions

26 June 2026

Site Storage of Aluminum Windows: Preventing Damage Before Install

23 June 2026

Aluminum Window Drainage & Weep Holes Guide

10 June 2026

Pre-Hung vs Site-Built Window Frames: Aluminum Installation Comparison

20 May 2026

Window Installation Best Practices: Avoiding Air and Water Leaks

14 May 2026

Featured Products

Series 80/118 Thermal Break Sliding Window - Product View 2Series 80/118 Thermal Break Sliding Window - Product View 2
Sliding Windows
Series 80/118 Thermal Break Sliding Window
·   The technology of European intelligent sun room is introduced, and automobile grade sealant strip is adopted, with good waterproof and drainage system. ·   Through intelligent control, the sunshine roof can realize two modes of opening ventilation and closing sealing, giving consumers a life...
Details
Details
Series Y3 110 Thermal Break Double Inswing Casement Window with ScreenSeries Y3 110 Thermal Break Double Inswing Casement Window with Screen - Product View 2
Tilt and Turn Window
Series Y3 110 Thermal Break Double Inswing Casement Window with Screen
·   Supports three-in-one glass railing functionality and micro-ventilation structure. ·   Entire frame with 2.0mm wall thickness with multi-chamber large thermal insulation strips and integrated isobaric sealing strips. ·   Three-seal design and 27A large hollow glass. Whole window joint glue injection process enhances sealing without...
Details
Details
Series Y1 105 Thermal Break Double Inswing Casement Window with ScreenSeries Y1 105 Thermal Break Double Inswing Casement Window with Screen - Product View 2
Tilt and Turn Window
Series Y1 105 Thermal Break Double Inswing Casement Window with Screen
·   Supports multiple opening methods: inward opening, tilt and turn, large floor-to-ceiling, wide opening, and large ventilation. ·   1.8mm wall thickness design with 45-degree glue injection, including mullion glue injection process, providing high stability and security. ·   Base-free British handle, paired with high-quality inner...
Details
Details
72 Aluminum Wood Thermal Break Inswing Casement Window72 Aluminum Wood Thermal Break Inswing Casement Window - Product View 2
Tilt and Turn Window
72 Aluminum Wood Thermal Break Inswing Casement Window
·   The exterior aluminum and interior wood design offers a dual decorative effect. With Italian design style, the appearance is both fashionable and classic, with smooth lines. The product holds multiple national design patents and utility model patents. ·   Manufactured using German production techniques,...
Details
Details

Custom Block

Blog Tags

    Aluminum window frames stored vertically on wooden pallets in a covered warehouse awaiting installation

    Site Storage of Aluminum Windows: Preventing Damage Before Install

    Why Proper Site Storage Is a Critical Step in Any Window Installation Project Aluminum windows are precision-engineered products. Factory tolerances are tight, finishes are applied under controlled conditions, and glazing...

    On by Today Doors and Windows 0 comments

    Aluminum window sill with weep holes draining water during rain

    Aluminum Window Drainage & Weep Holes Guide

    When a commercial building's windows begin leaking, the initial symptom is rarely dramatic. A faint halo of discoloration appears around the sill. A soft spot develops in the drywall. Flooring...

    On by Today Doors and Windows 0 comments

    Pre-Hung vs Site-Built Window Frames: Aluminum Installation Comparison

    Pre-Hung vs Site-Built Window Frames: Aluminum Installation Comparison for Contractors and Builders When planning a commercial or residential aluminum window installation, one of the most consequential decisions a contractor or architect makes is whether to specify pre-hung (factory-assembled) window frames or to fabricate and build frames on site. Both approaches are viable for aluminum systems, but they differ substantially in labor hours,...

    On by Today Doors and Windows 0 comments

    Window Installation Best Practices: Avoiding Air and Water Leaks

    Window installation is one of the most technically demanding phases in commercial and residential construction. Done correctly, it delivers decades of airtight, watertight performance. Done poorly, it becomes a persistent liability—driving up energy costs, inviting moisture damage, and generating callbacks that erode contractor margins. According to Universal Windows Direct, air leakage through improperly installed windows accounts for between 25% and 40% of...

    On by Today Doors and Windows 0 comments